Belanger FreeStyler - HydroBlade Specifications

INSTALLATION AND STARTUP
1MANUL220 Belanger, Inc.® * PO BOX 5470. * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 14-1
Chapter 14 HydroBlade® Assembly Option
HydroBlade® Specifications
Overview
There are 2 Pump Station options for the FreeStyler® HydroBlade® Option. In addition, there is a separate nozzle kit
for each Pump Station. These Pump Stations are offered as follows,
• Grundfos™ Centrifugal pump 10HP pumping station recommended for use with reclaim, this pump is ideal
for medium pressure high volume rinse
• Cat™ triplex plunger pump 25HP recommended for use when high-pressure high-volume rinse is desired.
Specifications
10HP Medium Pressure Pumping Station
Pump Type
Multistage Centrifugal Pump
Motor Type
10HP 3-Phase 208-230/460 V
Tank Capacity
30 Gallons
Maximum Flow
40 GPM
Maximum Pressure
260 PSI
Inlet size
Min 30 GPM, 3/4” Barb hose fitting
Outlet Size
1-1/4’’ Barb hose fitting
25HP Pumping Station
Pump Type
Cat™ Triplex plunger pump 25HP
Motor Type
25HP 3-Phase 208-230/460 V
Tank Capacity
30 Gallons
Maximum Flow
36 GPM
Maximum Pressure
1000 PSI
Inlet size
Outlet Size