General information about the documentation
1.1 This document
The present user manual complements the “Quick Start Guide” for the frequency inverters of the
AGL 202 and ACU 402 device series.
The user manual contains important information on the installation and use in
its specified
application range. Compliance with this user manual contributes to avoiding risks, minimizing
repair cost and downtimes and increasing the reliability and service live of the frequency inverter.
Fo
r this reason, make sure you read the user manual carefully.
WARNING
Compliance with the documentation is required to ensure safe operation of the frequen-
cy inverter. BONFIGLIOLI
VECTRON GmbH shall not be held liable for any damage
caused by any non-compliance with the documentation.
In case any problems occur which are not covered by the documentation sufficiently,
please contact the manufacturer.
1.2 Warranty and liability
BONFIGLIOLI VECTRON GmbH would like to point out that the contents of this user manual do not
form part of any previous or existing agreement, assurance or legal relationship. Neither are they
intended to supplement or replace such agreements, assurances or legal relationships. Any obligations
of the manufacturer shall solely be based on the relevant purchase agreement which also includes the
complete and solely valid warranty stipulations. These contractual warranty provisions are neither
extended nor limited by the specifications contained in this documentation.
The manufacturer reserves the right to correct or amend the specifications, product information and
omissions in these operating instructions without notice. The manufacturer shall not be liable for any
damage, injuries or costs which may be caused by the aforementioned reasons.
In addition to that, BONFIGLIOLI VECTRON GmbH excludes any warranty/liability claims for any per-
sonal and/or material damage if such damage is due to one or more of the following causes:
• inappropriate use of the frequency inverter,
• non-compliance with the instructions, warnings and prohibitions contained in the documentation,
• unauthorized modifications of the solar inverter,
• insufficient monitoring of parts of the machine/plant which are subject to wear,
• repair work at the machine/plant not carried out properly or in time,
• catastrophes by external impact and Force Majeure.
12
Operating Instructions
Agile
06/2013 This document
To Next Page
Loading...
Need help?
General
