Parameter list
15 Parameter list
The parameter list is structured according to the menu branches of the control software. The parame-
ters are listed in ascending numerical order. A headline (shaded) can appear several times, i.e. a sub-
ject area may be listed at different places in the table.
The parameter is available in the four data sets.
The parameter value is set by the SETUP routine.
The parameter cannot be written when the frequency inverter is in operation.
I
FIN
, U
FIN
, P
FIN
: Nominal values of frequency inverter, o
c
: Overload capacity of frequency inverter
15.1 Actual values (Menu Actual)
210 Stator Frequency Hz 0.00 ... 999.99
9.2
216 Isq A 0.0 ... I
221 Slip Frequency Hz 0.0 ... 999.99
Actual values of frequency inverter
Ï„
Actual values of frequency inverter
Internal Reference Frequency
Reference Percentage Value
231 Peak Value Long Term Ixt % 0.00 ... 100.00
9.4
Peak Value Short Term Ixt
235 Flux-Forming Voltage V 0.0 ... U
236 Torque-Forming Voltage V 0.0 ... U
238 Absolute Flux Value % 0.0 ... 100.0
9.2
239 Reactive Current A 0.0 ... I
9.2
Actual values of the system
Actual values of frequency inverter
Digital Inputs (Hardware)
339
Actual values (Menu Actual) 06/2013 Operating Instructions
Agile