BONFIGLIOLI Agile

Operational and error diagnosis
273 Application Warnings
367 Application warning status
Parameter
Application Warnings 273 displays the current warning.
Parameter
Application warning status 367 displays the warning at failure switch-off.
Meaning of code displayed by parameters
Application Warnings 273 and Application Warning
State
367:
Code
Warning status
A
00
00
NO WARNING
No warning message present.
A
00
01
BELT
Warning V-belt by Operation Mode 581.
A 00 40 SERVICE
Service of DC link or fan required. The time remaining until next ser-
vice has expired. At least for one of the parameters Operation Mode
Service Interval DC-link
1534 or Operation Mode Service Interval
Fan
1535 the setting “2 - Warning” is selected.
− Service of DC-link required. The value of Service Interval DC-
link
1530 has reached the value 0%.
− Service of fan required. The value of
Service Interval Fan 1531
has reached the value 0%.
A 00 80 User 1
The signal set on digital input
User Warning 1
1363 is active.
A 01 00 User 2
The signal set on digital input
User Warning 2
1364 is active.
Output signals
Application Warnings are signaled via digital signals.
216 -
Warning, application
1)
Signal if a message is output Application Warnings 273.
26 -
2)
1)
For linking to frequency inverter functions
2)
For output via a digital output. Select the signal source for one of the parameters 531, 532, 533,
554. See chapter 7.6.5 "Digital outputs".
338
Operating Instructions
Agile 06/2013 Warning status and warning status application