BONFIGLIOLI Agile User Manual

Energy saving
1550 Operation Mode Energy Saving Function
Parameter
Operation Mode Energy Saving Function 1550 defines if the power consumption (mag-
netic flux) is reduced by an adjustable value or by an automatically determined value. Evaluation must
be switched on via parameter
Energy Saving Function On 1552.
Operation Mode Energy
Saving Function 1550
Function
0 -
Off
Energy saving function is switched off. Factory setting.
1 - manual
Energy saving function can be switched on via a digital input or a logic
signal.
The digital input or the logic signal can be selected for parameter Energy
Saving Function On
1552.
Energy is saved by reducing the flux. The value of the flux reduction can
be set via parameter
Flux Reduction
1551.
2 - automatic
Energy saving function can be switched on via a digital input or a logic
signal.
The digital input or the logic signal can be selected for parameter Energy
Saving Function On
1552.
Energy is saved by reducing the flux. The value of the flux reduction is
determined automatically.
1551 Flux reduction (energy saving function)
In order to save energy, the magnetic flux is reduced by the value of
Flux Reduction 1551. One of
the following control methods must be selected:
−
Configuration 30 = "110 - IM sensor-less control" (V/f characteristic)
−
Configuration 30= "410 - IM: sensor-less field-orientated control (DMC)"
For parameter
Operation Mode Energy Saving Function 1550, "1 - manual" must be selected.
Parameters
Setting
No.
Description
Min.
Max.
Fact. sett.
1551 Flux Reduction 0% 100% 0%
High values impair the dynamic behaviour of the drive.
258
Operating Instructions
Agile 06/2013 Energy saving function

BONFIGLIOLI Agile Specifications

General

Brand	BONFIGLIOLI
Model	Agile
Category	DC Drives
Language	English