Confidential
CHAPTER 5
DISASSEMBLY AND ASSEMBLY
This chapter describes procedures for disassembling and assembling the machine with relates notes.
The provided disassembly order flow enables you to take in the quickest way to get an involved part at
a glance.
At the start of disassembling, you can check the disassembly order flow which guides you through a
shortcut to get to the part.
This chapter also covers screw tightening torques and lubrication points where the specified lubrication
should be applied when the machine is assembled.
CONTENTS
1. SAFETY PRECAUTIONS ..........................................................................5-1
2. PACKING....................................................................................................5-2
3. SCREW TORQUE LIST .............................................................................5-3
4. LUBRICATION ...........................................................................................5-6
5. OVERVIEW OF GEARS.............................................................................5-8
6. HARNESS ROUTING...............................................................................5-12
7. DISASSEMBLY FLOW.............................................................................5-30
8. DISASSEMBLY PROCEDURE ................................................................5-32
8.1 Cord Hook ................................................................................................................ 5-33
8.2 EXT Cap ................................................................................................................... 5-34
8.3 Roller Holder ASSY .................................................................................................. 5-35
8.4 Separation Pad ASSY .............................................................................................. 5-37
8.5 Back Cover/Back Cover Stopper L/R ....................................................................... 5-39
8.6 Fuser Cover.............................................................................................................. 5-42
8.7 Paper Eject Front Actuator ....................................................................................... 5-43
8.8 Fuser Unit ................................................................................................................. 5-45
8.9 Side Cover L ASSY/Access Cover ........................................................................... 5-49
8.10 Side Cover R ASSY................................................................................................ 5-52
8.11 Pull Arm L/Pull Arm R/Pull Arm Spring ................................................................... 5-54
8.12 Hinge ASSY L......................................................................................................... 5-58
8.13 Hinge R/Hinge R Support/Hinge Base ................................................................... 5-60
8.14 ADF Cover ASSY ................................................................................................... 5-61
8.15 Gear Cover ............................................................................................................. 5-62
8.16 Separation Roller Shaft ASSY ................................................................................ 5-63
To Next Page
Loading...
Need help?
General
