Brother MFC-9010CN - Low-Voltage Power Supply PCB ASSY

5-182
Confidential
8.82 Low-voltage Power Supply PCB ASSY
(1) Release the two Hooks to remove the Power supply switch from the Safety louver.
Fig. 5-233
(2) Remove the Screw pan (S/P washer) M4x8 DB and FG harness, and then remove the
Inlet from the Side frame R.
Fig. 5-234
Hook
Power supply switch
Safety louver
Hook
Hook
Hook
1a
1a
1b
1c
1d
Screw pan (S/P washer) M4x8 DB
Side frame R
Inlet
FG harness
<Right side>