Brother MFC-9010CN Service Manual

5-78
Confidential
8.26 Document Scanner Unit
(1) Remove the four Taptite cup B M3x10 screws (2 each at upper and lower sides) of the
Panel unit, and then lift the Panel unit.
Fig. 5-68
(2) Gently lift up the Panel unit slightly from the Document scanner unit and disconnect the
Connector (CN1) from the Panel PCB ASSY.
Fig. 5-69
Harness routing: Refer to “ Panel Unit.”
Note:
Do not pull the Panel unit strongly because a Harness is connected.
Taptite cup B M3x10
Panel unit
Taptite cup B M3x10
Document scanner unit
Panel unit
Panel PCB ASSY
CN1
Document scanner unit

Brother MFC-9010CN Specifications

General

Brand	Brother
Model	MFC-9010CN
Category	All in One Printer
Language	English