Brother MFC-9010CN - Inner Chute ASSY 2

5-110
Confidential
8.45 Inner Chute ASSY 2
(1) Remove the two Taptite bind B M4x12 screws from the Inner chute ASSY 2.
(2) Release the two Bosses to remove the Inner chute ASSY 2 from the Joint cover sub ASSY.
Fig. 5-121
Fig. 5-122
Assembling Note:
When assembling the Inner chute ASSY 2, make sure to assemble it in a way that the two
“A” of the Joint cover sub ASSY come above the Inner chute ASSY 2.
Boss
Joint cover sub ASSY
Inner chute ASSY 2
Boss
Taptite bind B M4x12
Joint cover sub ASSY
Inner chute ASSY 2
"A"