6-8
Confidential
(3) Click the “Brother Maintenance USB Printer” icon to select. Drag the necessary firmware
program file such as LZXXXX_$.upd and drop it.
(4) Upon completion of rewriting, the machine restarts and returns to the ready state
automatically.
Note:
After rewriting Sub firmware (PCL/PS) or Main firmware is completed, the machine returns
to the ready state. When you write a program file continuously, turn OFF the power of the
machine, and then turn it on again as pressing the 5 button. Check that “ ”
appears on the LCD.
To Next Page
Loading...
Need help?
General
