Brother MFC-9010CN - Page 557

App.1-24
Confidential
■ WSW21 (TAD setting 1)
■ WSW22 (ECM and call waiting caller ID)
* ECM: Error correction mode
Selector No. Function Setting and Specifications
1
l
5
Max. waiting time for voice signal
(Not used.)
6
7
Taping the call (Not used.)
8
Erasure of message stored in the
memory after the message transfer
0: Yes
1: No
Selector No. Function Setting and Specifications
1 ECM* in sending
0: ON (Enabled)
1: OFF (Disabled)
2 ECM* in receiving
0: ON (Enabled)
1: OFF (Disabled)
3 Call Waiting Caller ID (Not used.)
4 Not used.
5
l
8
Acceptable TCF bit error rate (%)
(Only at 4,800 bps) (Not used.)
Note:
Selector 3 is applicable to the American models only.