Brother MFC-9010CN - Page 570

App.1-37
Confidential
■ WSW41 (ON-duration of the scanning light source)
- Selectors 5 through 8: Modem attenuator
These selectors are used to adjust the transmitting level of the modem when the reception level at
the remote station is improper due to line loss. This function applies to super G3 protocol signals.
■ WSW42 (Internet mail settings)
Selector No. Function Setting and Specifications
1
l
3
ON-duration of the scanning
light source at room temperature
(Not used.)
4 I-FAX relay report (Not used.)
5
l
8
Modem attenuator
No. 5 6 7 8
0 0 0 0: -10 dBm
0 0 0 1: -11 dBm
0 0 1 0: -12 dBm
0 0 1 1: -13 dBm
0 1 0 0: -14 dBm
|
1 1 1 1: -25 dBm
Selector No. Function Setting and Specifications
1
Access to the incoming mail (POP3)
server (Periodical or on-demand)
(Not used.)
2
Access to the outgoing mail (SMTP)
serve (Not used.)
3 I-FAX relay (Not used.)
4 JBIG encoding system
0: Not allowed
1: Allowed
5 Drum discharge detection (Not used.)
6
l
8
Not used.