Danfoss VLT AutomationDrive FC 360

Option Name Description
[73] Logic rule 3 See parameter group 13-4* Logic Rules.
If logic rule 3 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
[74] Logic rule 4 See parameter group 13-4* Logic Rules.
If logic rule 4 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
[75] Logic rule 5 See parameter group 13-4* Logic Rules.
If logic rule 5 is evaluated as TRUE, the
output goes high. Otherwise, it is low.
[80] SL digital output A See parameter 13-52 SL Controller Action.
The output goes high whenever the Smart
Logic Action [38] Set dig. out. A high is
executed. The output goes low whenever
the Smart Logic Action [32] Set dig. out. A
low is executed.
[81] SL digital output B See parameter 13-52 SL Controller Action.
The output goes high whenever the Smart
Logic Action [39] Set dig. out. B high is
executed. The output goes low whenever
the Smart Logic Action [33] Set dig. out. B
low is executed.
[82] SL digital output C See parameter 13-52 SL Controller Action.
The output goes high whenever the Smart
Logic Action [40] Set dig. out. C high is
executed. The output goes low whenever
the Smart Logic Action [34] Set dig. out. C
low is executed.
[83] SL digital output D See parameter 13-52 SL Controller Action.
The output goes high whenever the Smart
Logic Action [41] Set dig. out. D high is
executed. The output goes low whenever
the Smart Logic Action [35] Set dig. out. D
low is executed.
[92] Encoder emulate output B
[95] Power Loss Detection
[160] No alarm The output is high when no alarm is
present.
[161] Running reverse The output is high when the drive is
running counterclockwise (the logical
product of the status bits Running AND
Reverse).
[165] Local ref active
[166] Remote ref active
128 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360