Danfoss VLT AutomationDrive FC 360 Programming Guide

Programming Guide | VLT® AutomationDrive FC 360
Option Name
[0] Linear
[1] Square root
4.9 Parameter Group 8-** Comm. and Options
4.9.1 8-0* General Settings
8-00 Option A warning control
Default value: Size related Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Enable or disable installed options.
Option Name
[0] None
[1] Disable Warning
8-01 Control Site
Default value: [0] Digital and ctrl.word Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
The setting in this parameter overrides the settings in parameter 8-50 Coasting Select to parameter 8-56 Preset Reference Select.
Option Name Description
[0] Digital and ctrl.word Control by using both digital input and
control word.
[1] Digital only Control by using digital inputs only.
[2] Control word only Control by using control word only.
8-02 Control Source
Default value: Size related Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the source of the control word.
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 171

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English