Data type: Uint8 Change during operation: True
Select the function from the available digital input range.
For the options of parameter 5-12 Terminal 27 Digital Input, see parameter 5-10 Terminal 18 Digital Input.
5-13 Terminal 29 Digital Input
Default value: [14] Jog Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the function from the available digital input range.
For the options of parameter 5-13 Terminal 29 Digital Input, see parameter 5-10 Terminal 18 Digital Input.
5-14 Terminal 32 Digital Input
Default value: [0] No operation Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the function from the available digital input range.
For the options of parameter 5-14 Terminal 32 Digital Input, see parameter 5-10 Terminal 18 Digital Input.
5-15 Terminal 33 Digital Input
Default value: [16] Preset ref bit 0 Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the function from the available digital input range.
For the options of parameter 5-15 Terminal 33 Digital Input, see parameter 5-10 Terminal 18 Digital Input.
5-16 Terminal 31 Digital Input
Default value: [0] No operation Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the function from the available digital input range.
For the options of parameter 5-16 Terminal 31 Digital Input, see parameter 5-10 Terminal 18 Digital Input.
4.6.3 5-3* Digital Outputs
The 2 solid-state digital outputs are common for terminals 27 and 29. Set the I/O function for terminal 27 in parameter 5-01 Terminal 27
Mode, and set the I/O function for terminal 29 in parameter 5-02 Terminal 29 Mode. Terminals 42 and 45 can also be configured as digital
outputs.
118 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360
To Next Page
Loading...
Need help?
General