Danfoss VLT AutomationDrive FC 360 Programming Guide

Option Name
[4] PID error inverse
[5] PID resets I part
[6] PID enable
8-19 Product Code
Default value: Size related Parameter type: Range (0–2147483647), Array
[2]
Setup: 1 setup Conversion index: 0
Data type: Uint32 Change during operation: True
Select 0 to read out the actual fieldbus product code according to the mounted fieldbus option. Select 1 to read out the actual vendor ID.
4.9.3 8-3* FC Port Settings
8-30 Protocol
Default value: [0] FC Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
Select the protocol for the integrated RS485 port.
Option Name Description
[0] FC Communication according to the FC
protocol.
[1] Modbus RTU Communication according to the Modbus
RTU protocol.
8-31 Address
Default value: 1 Parameter type: Range (0–247)
Setup: 1 setup Conversion index: 0
Data type: Uint8 Change during operation: True
Enter the address for the RS485 port. Valid range: 1–126 for FC-bus, or 1–247 for Modbus.
8-32 Baud Rate
Default value: Size related Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
Select the baud rate for the RS485 port.
174 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English