Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

Programming Guide | VLT® AutomationDrive FC 360

 NOTICE

For some of the protocols, not all options are available.

Option Name

[0] 2400 Baud

[1] 4800 Baud

[2] 9600 Baud

[3] 19200 Baud

[4] 38400 Baud

[5] 57600 Baud

[6] 76800 Baud

[7] 115200 Baud

8-33 Parity/Stop Bits

Default value: Size related Parameter type: Option

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: True

Parity and Stop Bits for the protocol using the FC Port. For some of the protocols, not all options are available.

Option Name

[0] Even Parity, 1 Stop Bit

[1] Odd Parity, 1 Stop Bit

[2] No Parity, 1 Stop Bit

[3] No Parity, 2 Stop Bits

8-35 Minimum Response Delay

Default value: 0.010 s Parameter type: Range (0.001–0.500 s)

Setup: 1 setup Conversion index: -3

Data type: Uint16 Change during operation: True

Specify the minimum delay time between receiving a request and sending a response. This is used for overcoming modem turn-around

delays.

8-36 Maximum Response Delay

Default value: Size related Parameter type: Range (0.100–10.000 s)

Setup: 1 setup Conversion index: -3

Other manuals for Danfoss VLT AutomationDrive FC 360