Danfoss VLT AutomationDrive FC 360

Programming Guide | VLT® AutomationDrive FC 360
Data type: VisStr Change during operation: False
View the serial number of the installed option.
15-70 Option in Slot A
Default value: 0 Parameter type: Range (0–30)
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
View the type code string for the option installed in slot A and a translation of the type code string.
15-71 Slot A Option SW Version
Default value: 0 Parameter type: Range (0–20)
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
View the software version for the option installed in slot A.
4.14.5 15-9* Parameter Info
Use this parameter group to view information about available parameters for the drive.
15-92 Defined Parameters
Default value: 0 Parameter type: Range (0–2000), Array [44]
Setup: 1 setup Conversion index: 0
Data type: Uint16 Change during operation: True
View a list of all defined parameters in the drive. The list ends with 0.
15-98 Drive Identification
Default value: 0 Parameter type: Range (0–56)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
This parameter contains data used by the MCT 10 software.
15-99 Parameter Metadata
Default value: 0 Parameter type: Range (0–9999), Array [36]
Setup: 1 setup Conversion index: 0
Data type: Uint16 Change during operation: False
This parameter contains data used by the MCT 10 software.
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 253