Name: Danfoss VLT AutomationDrive FC 360
Brand: Danfoss
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Programming Guide | VLT® AutomationDrive FC 360

4 Parameter Descriptions

4.1 Parameter Group 0-** Operation/Display

4.1.1 Introduction

This chapter introduces parameters related to the basic functions of the drive, function of the LCP buttons, and configuration of the LCP

display.

4.1.2 0-0* Basic Settings

0-01 Language

Default value: [0] English Parameter type: Option

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: True

Select the language to be used in the display.

Option Name

[0] English

[10] Chinese

[28] Portuguese

0-03 Regional Settings

Default value: [0] International Parameter type: Option

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: False

To meet the needs for different default settings in different parts of the world, parameter 0-03 Regional Settings is implemented in the

drive. The selected setting influences the default setting of the motor nominal frequency.

Option Name Description

[0] International Activate parameter 1-20 Motor Power

[kW] for setting the motor power in kW

and set the default value of parameter

1-23 Motor Frequency to 50 Hz.

[1] North America Activate parameter 1-20 Motor Power

[kW] for setting the motor power in hp

and set the default value of parameter

1-23 Motor Frequency to 60 Hz.

0-04 Operating State at Power-up

Default value: [1] Forced stop, ref=old Parameter type: Option

Danfoss VLT AutomationDrive FC 360 Programming Guide

Other manuals for Danfoss VLT AutomationDrive FC 360