Programming Guide | VLT® AutomationDrive FC 360
Figure 10: Quick Menu Structure
3.1.3 Status Menu
After power-up, Status Menu is active. Press [Menu] to toggle between Status, Quick Menu, and Main Menu.
To toggle between the options in each menu, press the Up/Down key.
The display indicates the status mode with a small arrow above Status.
Figure 11: Indicating Status Mode
The following 8 parameters can be accessed from the LCP status menu in auto-on mode:
l Parameter 16-02 Reference [%].
l Parameter 16-09 Custom Readout.
l Parameter 16-10 Power [kW].
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 23
To Next Page
Loading...
