Name: Danfoss VLT AutomationDrive FC 360
Brand: Danfoss
Rating: 4 (1 reviews)

To Next Page

To Previous Page

0-21 Display Line 1.2 Small

Default value: [1614] Motor current Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint16 Change during operation: True

Select a variable to be shown in line 1, center position.

For the options of parameter 0-21 Display Line 1.2 Small, refer to parameter 0-20 Display Line 1.1 Small.

0-22 Display Line 1.3 Small

Default value: [1610] Power [kW] Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint16 Change during operation: True

Select a variable to be shown in line 1, right position.

For the options of parameter 0-22 Display Line 1.3 Small, refer to parameter 0-20 Display Line 1.1 Small.

0-23 Display Line 2 Large

Default value: [1613] Frequency Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint16 Change during operation: True

Select a variable to be shown in line 2.

For the options of parameter 0-23 Display Line 2 Large, refer to parameter 0-20 Display Line 1.1 Small.

0-24 Display Line 3 Large

Default value: [1502] kWh Counter Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint16 Change during operation: True

Select a variable to be shown in line 3.

For the options of parameter 0-24 Display Line 3 Large, refer to parameter 0-20 Display Line 1.1 Small.

4.1.5 0-3* LCP Custom Readout

Parameters for configuring the custom readout value and defining custom display texts. It is possible to customize the display elements

for various purposes.

Custom readout

The calculated value to be shown is based on settings in parameter 0-30 Custom Readout Unit, parameter 0-31 Custom Readout Min

Value (linear only), parameter 0-32 Custom Readout Max Value, parameter 4-14 Motor Speed High Limit [Hz], and actual speed.

Programming Guide | VLT® AutomationDrive FC 360

Danfoss VLT AutomationDrive FC 360 Programming Guide

Other manuals for Danfoss VLT AutomationDrive FC 360