Danfoss VLT AutomationDrive FC 360 Programming Guide

Programming Guide | VLT® AutomationDrive FC 360
Option Name
[0] Disabled
[1] Enabled
12-81 HTTP Server
Default value: [0] Disabled Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
Enable or disable the built-in HTTP server.
Option Name
[0] Disabled
[1] Enabled
12-82 SMTP Service
Default value: [0] Disabled Parameter type: Option
Setup: 1 setup Conversion index: –
Data type: Uint8 Change during operation: True
Enable or disable the SMTP (e-mail) service on the option.
Option Name
[0] Disabled
[1] Enabled
12-89 Transparent Socket Channel Port
Default value: 4000 Parameter type: Range (0–65535)
Setup: 1 setup Conversion index: 0
Data type: Uint16 Change during operation: True
Configure the TCP port number for the transient socket channel. This enables FC telegrams to be sent transiently on Ethernet via TCP.
Default value is 4000 which indicates disabled.
4.11.5 12-9* Advanced Ethernet Services
12-90 Cable Diagnostic
Default value: [0] Disabled Parameter type: Option
Setup: 1 setup Conversion index: –
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 207

Danfoss VLT AutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 360
Category	DC Drives
Language	English