Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

Option Name

[0] Disabled

[1] Warning

[2] Trip

[3] Jog

[4] Freeze Output

[5] Max Speed

[6] Switch to Open Loop

4.16.6 17-7* Position Scaling

17-72 Position Unit Numerator

Default value: 1 Parameter type: Range (-16777215–16777215)

Setup: All setups Conversion index: 0

Data type: Int32 Change during operation: False

Set the position unit numerator.

17-73 Position Unit Denominator

Default value: 1 Parameter type: Range (-16777215–16777215)

Setup: All setups Conversion index: 0

Data type: Int32 Change during operation: False

Set the position unit denominator.

17-74 Position Offset

Default value: 0 Parameter type: Range (-2147483647–

2147483647)

Setup: All setups Conversion index: 0

Data type: Int32 Change during operation: False

Set the position offset.

4.17 Parameter Group 18-** Data Readouts 2

4.17.1 18-3* Analog ReadOuts

18-37 Temp. Input X48/4

Default value: 0 Parameter type: Range (-500–500)

Setup: All setups Conversion index: 0

Data type: Int16 Change during operation: True

Programming Guide | VLT® AutomationDrive FC 360

Other manuals for Danfoss VLT AutomationDrive FC 360