Danfoss VLT AutomationDrive FC 360

15-51 Drive Serial Number
Default value: 0 Parameter type: Range (0–13)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the drive serial number.
15-53 Power Card Serial Number
Default value: 0 Parameter type: Range (0–21)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the power card serial number.
4.14.4 15-6* Option Ident
This read-only parameter group contains information about the hardware and software configuration of the options installed in slots A,
B, C0, and C1.
15-60 Option Mounted
Default value: Size related Parameter type: Range (0–30), Array [8]
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
View the installed option type.
15-61 Option SW Version
Default value: Size related Parameter type: Range (0–20), Array [8]
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
View the software version of the installed option.
15-62 Option Ordering No
Default value: Size related Parameter type: Range (0–8), Array [8]
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
Show the code number for the installed options.
15-63 Option Serial No
Default value: Size related Parameter type: Range (0–18), Array [8]
Setup: All setups Conversion index: 0
252 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360