Danfoss VLT AutomationDrive FC 360

Programming Guide | VLT® AutomationDrive FC 360
15-44 Ordered Type Code
Default value: 0 Parameter type: Range (0–41)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the type code string used for reordering the drive in its original configuration.
15-45 Actual Typecode String
Default value: 0 Parameter type: Range (0–40)
Setup: All setups Conversion index: 0
Data type: VisStr Change during operation: False
View the actual type code.
15-46 Drive Ordering No
Default value: 0 Parameter type: Range (0–9)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the 8-digit code number used for reordering the drive in its original configuration.
15-48 LCP Id No
Default value: 0 Parameter type: Range (0–21)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the LCP ID number.
15-49 SW ID Control Card
Default value: 0 Parameter type: Range (0–21)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the control card software version number.
15-50 SW ID Power Card
Default value: 0 Parameter type: Range (0–21)
Setup: 1 setup Conversion index: 0
Data type: VisStr Change during operation: False
View the power card software version number.
Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507 | 251