Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

Option Name

[3407] PCD 7 Write For Application

[3408] PCD 8 Write For Application

[3409] PCD 9 Write For Application

[3410] PCD 10 Write For Application

9-16 PCD Read Configuration

Default value: Size related Parameter type: Option, Array [10]

Setup: 1 setup Conversion index: –

Data type: Uint16 Change during operation: True

Select the parameters to be assigned to PCD 3–10 of the telegrams. The number of available PCDs depends on the telegram type. Values

in PCD 3–10 contain the actual data values of the selected parameters.

Option Name

[0] None

[1500] Operating hours

[1501] Running Hours

[1502] kWh Counter

[1600] Control Word

[1601] Reference [Unit]

[1602] Reference [%]

[1603] Status Word

[1605] Main Actual Value [%]

[1609] Custom Readout

[1610] Power [kW]

[1611] Power [hp]

[1612] Motor Voltage

[1613] Frequency

[1614] Motor current

[1615] Frequency [%]

[1616] Torque [Nm]

[1617] Speed [RPM]

[1618] Motor Thermal

[1620] Motor Angle

Programming Guide | VLT® AutomationDrive FC 360

Other manuals for Danfoss VLT AutomationDrive FC 360