Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

13-10 Comparator Operand

Default value: [0] Disabled Parameter type: Option, Array [6]

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: True

Select the variable to be monitored by the comparator. This is an array parameter containing comparators 0 to 9.

Option Name

[0] Disabled

[1] Reference %

[2] Feedback %

[3] Motor speed

[4] Motor Current

[6] Motor power

[7] Motor voltage

[8] DC-link voltage

[12] Analog input AI53

[13] Analog input AI54

[18] Pulse input FI29

[19] Pulse input FI33

[20] Alarm number

[30] Counter A

[31] Counter B

13-11 Comparator Operator

Default value: [1] Approx. Equal (~) Parameter type: Option, Array [6]

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: True

Select the operator to be used in the comparison. This is an array parameter containing comparator operators 0 to 9.

Programming Guide | VLT® AutomationDrive FC 360

Other manuals for Danfoss VLT AutomationDrive FC 360