Danfoss VLT AutomationDrive FC 360

To Next Page

To Previous Page

Programming Guide | VLT® AutomationDrive FC 360

Option Name Description

[0] Off Select [0] Off only when the drive is

connected to an isolated mains source (IT

mains).

[1] On Select [1] On to turn on the RFI filter. The

RFI filter ensures that the drive complies

with EMC standards.

[2] Grid Type

14-51 DC-Link Voltage Compensation

Default value: [1] On Parameter type: Option

Setup: All setups Conversion index: –

Data type: Uint8 Change during operation: False

Enable or disable the DC-link voltage compensation.

Option Name

[0] Off

[1] On

14-52 Fan Control

Default value: [5] Constant-on mode Parameter type: Option

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: True

Select the fan control mode.

Option Name

[5] Constant-on mode

[6] Constant-off mode

[7] On-when-Inverter-is-on-else-off Mode

[8] Variable-speed mode

14-55 Output Filter

Default value: [0] No Filter Parameter type: Option

Setup: 1 setup Conversion index: –

Data type: Uint8 Change during operation: False

Select the type of output filter connected.

Other manuals for Danfoss VLT AutomationDrive FC 360