Danfoss VLT AutomationDrive FC 360

Value sent in PCD4 of fieldbus telegram.
34-25 PCD 5 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD5 of fieldbus telegram.
34-26 PCD 6 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD6 of fieldbus telegram.
34-27 PCD 7 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD7 of fieldbus telegram.
34-28 PCD 8 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD8 of fieldbus telegram.
34-29 PCD 9 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD9 of fieldbus telegram.
34-30 PCD 10 Read For Application
Default value: 0 Parameter type: Range (0–65535)
Setup: All setups Conversion index: 0
Data type: Uint16 Change during operation: True
Value sent in PCD10 of fieldbus telegram.
292 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360