Danfoss VLT AutomationDrive FC 360

35-03 Term. X48/7 Input Type
Default value: [0] Not Connected Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
View the temperature sensor type detected at input X48/7.
Option Name
[0] Not Connected
[1] PT100 2-wire
[3] PT1000 2-wire
[5] PT100 3-wire
[7] PT1000 3-wire
35-05 Term. X48/10 Input Type
Default value: [0] Not Connected Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
View the temperature sensor type detected at input X48/10.
Option Name
[0] Not Connected
[1] PT100 2-wire
[3] PT1000 2-wire
[5] PT100 3-wire
[7] PT1000 3-wire
35-06 Temperature Sensor Alarm Function
Default value: [5] Stop and trip Parameter type: Option
Setup: All setups Conversion index: –
Data type: Uint8 Change during operation: True
Select the alarm function.
294 | Danfoss A/S © 2024.01 AU275649936274en-001401 / 130R0507
Programming Guide | VLT® AutomationDrive FC 360