Dionex As - Page 262

AS Autosampler Operator’s Manual
250 Doc. 065051-03 1/08
SAMPLE
SYRINGE
VOLUME
The volume of the sample syringe
installed. Press Select Δ or Select ∇ to
scroll through the choices.
If the AS is equipped with the
simultaneous injection option (see
Section 3.6.9
), select either the 5,000 or
10,000 μL size.
For sequential and concentrate modes, any
sample syringe size (except 2.5 mL) can
be installed.
100, 250,
500, 1,000, 5,000,
10,000 μL
(default=250)
For simultaneous
injection mode: 5,000
or 10,000 μL
(default=5,000)
SAMPLE
SYRINGE
CONFIG
The action to be performed by the sample
syringe. These actions are used to
configure the syringe at initial setup or
after a new syringe is installed.
INITIALIZE moves the syringe to an initial
position.
READY is displayed when syringe
configuration is complete; no action
occurs. See Section 5.3
for details.
INITIALIZE
READY
PREP
SYRINGE
VOLUME
The volume of the prep syringe installed.
Press Select Δ or Select ∇ to scroll
through the choices.
250, 500, 1,000,
5,000, 10,000 μL
(default=5,000)
PREP
SYRINGE
CONFIG
The action to be performed by the prep
syringe. See the
SAMPLE SYRINGE
CONFIG
section for details.
INITIALIZE
READY
Screen Field Description Values