Dionex As - Editing a Schedule; Deleting a Schedule; Copying a Schedule; D.6.5 Editing a Schedule

D • Front Panel Control
Doc. 065051-03 1/08 303
METHOD
In the
METHOD field, enter the method to run (1 through 99) on each vial
in the range.
D.6.5 Editing a Schedule
1. Go to the SCHEDULE screen.
2. In the
EDIT field, enter the number of the schedule to be edited.
3. Press
Enter.
4. Change the schedule parameters.
5. Save the schedule. The changes can be saved to the same method
number or to a new (unused) method number. If you save to a new
number, the original method remains unchanged.
D.6.6 Deleting a Schedule
1. Go to the SCHEDULE screen.
2. Position the cursor in the
EDIT field and press Delete. A confirmation
message appears.
3. Press
Delete again to delete the schedule.
D.6.7 Copying a Schedule
1. Go to the SCHEDULE screen.
2. Position the cursor in the
EDIT field and enter the number of the
schedule to be copied.
3. Position the cursor in the
SAVE TO field, enter a new (unused)
schedule number and press
Enter. The parameters from the original
schedule are copied to the new schedule and the original schedule is
unchanged.