AS Autosampler Operator’s Manual
186 Doc. 065051-03 1/08
B.3 Autosampler Installation
B.3.1 Before You Begin
• Install the chromatography system components (pump, detector,
column, suppressor, etc.) before installing the autosampler.
• Before connecting the AS to a Chromeleon or Chromeleon Xpress
PC, make sure Chromeleon is installed on the PC. Refer to Installing
the Chromeleon Chromatography Management System with a Dionex
Ion Chromatograph (Document No. 031883) for instructions.
B.3.2 Installation Checklist
Verify that all shipping restraints are removed
Connect the syringe(s) and drain line
Connect the injection valve
(Optional) Connect the AS to the Chromeleon PC or to the
Chromeleon Xpress PC
(Optional) Install a diverter valve for sequential injections
(Optional) Install a second AS kit
Plug the power cord into a grounded power source
Turn on the system power
Select the module setup options
Prime the liquid lines
Remove bubbles from the syringe
To Next Page
Loading...
