AS Autosampler Operator’s Manual
300 Doc. 065051-03 1/08
D.6.2 Saving a Schedule
1. Position the cursor in the SAVE TO field.
2. Do one of the following:
• To save the current schedule, press Enter.
• To save to a different schedule, enter a new number and then
press
Enter.
D.6.3 Selecting an Action if a Scheduled Vial Is Missing
Before beginning each injection, the AS checks that a vial is present in the
scheduled position in the tray. If the vial is missing, the AS can either stop
and wait, or skip the vial and continue. The action is specified in the
schedule.
1. In the
SCHEDULE screen, move the cursor to the MISSING VIAL
ACTION field and select either STOP or SKIP.
STOP: The AS stops when a scheduled vial is missing, allowing you
to place a vial in position. To resume the schedule, press
Hold/Run.
SKIP: The AS ignores a missing vial and continues to the next vial.
2. Press
Enter or a cursor arrow to confirm the choice.
To Next Page
Loading...
