Dionex As - Saving a Method; D.5.2 Saving a Method

AS Autosampler Operator’s Manual
280 Doc. 065051-03 1/08
2. In the EDIT field, enter the number of an unused method.
3. Press
Enter.
4. Go to each method screen and enter the method parameters.
• For details about defining sample prep steps, see Section D.5.3.
• For details about selecting method setup parameters, see
Section D.5.4
.
• For details about defining timed events, see Section D.5.5.
5. Save the method (see Section D.5.2
).
D.5.2 Saving a Method
1. From any of the three method screens, press the Menu button to
return to the
METHOD MENU.
2. Position the cursor in the SAVE TO field.
3. Do one of the following:
• To save the current method, press Enter.
• To save to a different method, enter a new number and then press
Enter.