Dionex As - Selecting and Starting the Schedule

D • Front Panel Control
Doc. 065051-03 1/08 275
D.3.1 Selecting and Starting the Schedule
1. Go to the MAIN STATUS or DETAIL STATUS screen.
2. Position the cursor in the control mode field and press
Select Δ or
Select ∇
to select SCH (schedule) control (see Figure D-1).
3. Press
Enter.
4. Press a numeric button to select the desired schedule number or press
Select Δ or Select ∇ to scroll through the numbers (1 through 9).
5. Press
Enter.
6. To start the schedule, press the
Hold/Run button.
NOTE You can also select the schedule from the
SCHEDULE screen (see Figure D-2). Enter the
number in the
RUN field and press Enter. Press the
Hold/Run button to start the schedule.
Figure D-1. Main Status Screen—Schedule Control Mode
Figure D-2. Schedule Screen
Help Prompt
IDLE
TIME
VOL
METHOD:
SCH LINE
VIAL#
INJ#
/
TRAY:
min
uL
1
LOCAL
°C
- -
Control Mode Field
Help Prompt
SAVE TO
RUNSCHEDULE
25.0
5.0
1
1
14 3
5
5
1
6
6
1
1
MISSING VIAL ACTION:
INJ/ INJ
VIAL METHOD
VOL(uL)
VIAL#
LINE ENDSTART
EDIT
SKIP
11
1
1-4
5
6
-
-
-
-
25.0