z DUPRINTER Installation Instructions
chap.5
255
WARNING
¡Connect the DUPRINTER to an outlet providing a
50Hz, 8A power supply of at least 230V.
¡Insert the power cord's plug correctly into the
outlet, so that electrical connection is effected
completely.
¡Position the DUPRINTER close to the power outlet.
Do not connect multiple loads to a single outlet.
If use of an extension cord is necessary:
Extension cord should be of at least 250V, 8A
specification, conform to standard, and not
exceed 5m in length.
¡The power cord should never be stepped on, or
crushed between objects. If it is, accidents could
result.
r Turn the power switch ON.
t Check the liquid crystal display on the operation
panel.
¡The display should function normally.
230V AC model
To Next Page
Loading...
Need help?
General