FICEP 32292 - 2.1 MAIN CAPACITIES AND SPECIFICATIONS; 2.1.1 Type of sections that can be processed

FEATURES
FICEP
1001 DFB
Drilling & Sawing Line
Page 2-3
2.1 MAIN CAPACITIES AND SPECIFICATIONS
2.1.1 Type of sections that can be processed
Double T Beams (welded and/or fabricated) having the following characteristics:
Web height
min.
max.
80
1015
mm.
mm.
Flanges height
min.
max.
42
450
mm.
mm.
U channels
min.
max.
80
1015
mm.
mm.
Flanges height
min.
max.
45
300
mm.
mm.
Angles
min.
max.
80x80x8
250x250x40
mm.
mm.
Flats
min.
max.
100
1000
mm.
mm.
Square tubes
min.
max.
80x80
450x450
mm.
mm.
Rectangular tubes
min.
max.
80x40
1000x450
mm.
mm.
Range of section lengths that can be processed
min.
max.
max.
2500
20000
20000
mm
mm entry side
mm exit side
Positioning weight
max.
5400
Kg
Linear weight of the section to be handled
max.
220
Kg/m
Carriage speed
max.
50
m/min.
Note.
The physical and dimensional characteristics of the structural steel sections are
set forth by UNI STANDARDS; this does also apply to rolling and distortion
tolerances.