FICEP 32292 - 2.1.9 Minimum programmable increment

FEATURES
Page 2-8
1001 DFB
Drilling & Sawing Line
FICEP
2.1.9 Minimum programmable increment
X axis
+/- 0,1 mm
Y axis
+/- 0,1 mm
Z axis
+/- 0,1 mm
Positioning accuracy (*)
- within holes of the same group (pattern)
+/- 0,5 mm.
- within groups of holes positioned at L distance ( L
measured in
metres)
+/- 0,5+(Lx0,06)
(*)
The above accuracies do only apply to correctly adjusted machines fitted with
sharp and correctly mounted tools