FICEP 32292 - 2.5 CONTROL SYSTEM

FEATURES
Page 2-12
1001 DFB
Drilling & Sawing Line
FICEP
2.5 CONTROL SYSTEM
The new generation control unit, with 3+1 controlled axes, is based on a field bus
CANopen technology.
The CNC is positioned in a mobile control panel, on a pedestal, to let the operator have a
complete system overview.
All the input and output cards are connected to the bus and positioned, where possible,
directly on the machine.
The CNC is equipped with:
 digital inputs (24V – optoinsulated)
 digital outputs (24V – protected transistors)
The control panel is an industrial PC containing the CNC and having the following
specifications:
 600 Mhz CPU with L2 512 KB “cache”
 512 MB RAM memory
 Touch screen colour video TFT 12.1’’
 Keyboard panel and auxiliary pushbutton panel
 10/100 RJ45 Ethernet port
 USB modem
 1 additional USB port
 WINDOWS XP Embedded operative system
 Teleservice software
Programming
 Simplified data input (with tables and workpiece on-screen graphics)
 Absolute and incremental values
 Diameters programming
 Linear, matrix and flange patterns
 Nesting of different workpieces into the same bar, with on-screen graphics
 Automatic accumulation
Processing
 Automatic tool assignment
 Unit offset sum
 Values ordering
 Automatic optimization on the basis of the quantities left for each single workpiece