FEATURES
1001 DFB
Drilling & Sawing Line
Execution
Automatic bar length survey and re-calculation for the optimized accumulation.
Automatic cycle stop for “setup” modification, and on-screen indication of the tools to
be changed.
Possibility for the drill head to operate in “multitasking” mode in its working area
(even with automatic tool changer)
Automatic control to prevent any possible collision of the drill
Drilling parameters table.
All the indications are clearly displayed on the screen, and concern:
Current program indication, with clear description of the program running at the
moment
CNC inside and outside alarms
Registration of the date and time of the last 100 alarm messages
Diagnostic messages to the operator
To Next Page
Loading...