FICEP 32292 - 4.8.9 Sensing Unit (probes) for the Drilling Unit in Vertical position; 4.8.10 Sensing Unit (probe) for the for the Drilling Unit in Horizontal position (optional)

MACHINE SET-UP
Page 4-38
1001 DFB
Drilling & Sawing Line
FICEP
4.8.9 Sensing Unit (probes) for the Drilling Unit in Vertical
position
Encoder pick-up system (no. 1 on the mobile jaw). No setup nor adjustment is required.
4.8.10 Sensing Unit (probe) for the for the Drilling Unit in
Horizontal position (optional)
Electronic device for zero reference setting (top side).
Device for the automatic zero reference setting of the drill spindle gaugeline when the head
is horizontally positioned to the web axis.
The device consists in one button (probe sensing unit) that survey the position of the web
top side and the flange height.