FICEP 32292 - 4.6 PNEUMATIC SYSTEM

MACHINE SET-UP
FICEP
1001 DFB
Drilling & Sawing Line
Page 4-27
4.6 PNEUMATIC SYSTEM
The pneumatic system is of extremely simple design.
Nevertheless, your attention is called to a few fundamentals.
The supply line must be large enough to insure the system max. efficiency,
especially when the air compressor is located far away from the machine.
The following conditions are responsible for a fool-proof operation and
performance of the pneumatic system:
AIR TEMPERATURE
min.
max.
+ 4° C
+ 80° C
AMBIENT
TEMPERATURE
min.
max.
+ 4° C
+ 45° C
AIR PRESSURE
max.wrkg.
min.
5 - 6 bar
4 bar