MACHINE SET-UP
1001 DFB
Drilling & Sawing Line
4.4.2 How to select the hydraulic oil
At this stage, it is quite clear that the utmost importance is attached to the
type of oil to be used in any hydraulic system and to its inspection at regular
intervals.
This is the reason why we have given you, in the previous page a list of
hydraulic oils equivalent to the fluids recommended and used by ourselves.
4.4.3 How to fill up the reservoir
After you have made sure that the oil you have available does strictly
comply with our recommendations and that possible water infiltration did
not deteriorated it, clean all the oil inlets and nozzles accurately.
Pour the oil into the reservoir through the proper filter; use the pump if
necessary.
Fill the reservoir till the max. level and write down the type of oil and date
of filling.
Never add oils of different type and quality. In the event you intend to
change the type and quality of oil, make sure to drain off all the oil from the
system.
4.4.4 Hydraulic oil replacement
Make sure to comply with all the suggestions and recommendations given
by us: inspect thoroughly the reservoir and keep the oil at the max. level,
and however replace A L L the oil in the system every 2 0 0 0 h o u r s of
operations.
To Next Page
Loading...