Connecting a PTZ Camera
23
PTZ Controls
1. Channel: Select the channel the PTZ camera connects to
2. Speed slider: Increase or decrease the pan and tilt speed
3. Direction keys: Click to pan and tilt the camera
4. Camera adjustments: Click the + and — symbols to adjust the camera Zoom, Focus
and Iris settings
5. Camera pre-set controls
23.3 PTZ Presets and PTZ Cruise
You can set preset positions for your PTZ cameras. You can also use PTZ cruise to have
the camera automatically cycle through presets.
23.3.1 Setting PTZ Presets
1. Using the PTZ controls, move the camera into position.
2. (Optional) In the Time field, select the number of seconds the camera will remain in
that position during PTZ cruise before going to the next position.
3. Click Set to set the preset. The Total and No. field will automatically increase. The Total
field shows you the total number of created presets, and the No. field shows you the
number of the preset you are currently creating.
4. Complete the steps above to create additional presets as needed. Press Save when
you are finished to save all created presets.
#LX400005; r. 1.0/13714/13883; en-US
166
To Next Page
Loading...
Need help?
General
