Setting the Date and Time
10
CAUTION
It is highly recommended to set the date and time when first setting up your system.
Inaccurate time stamps may render your footage unusable for court evidence.
To set the date and time:
1. Right-click or move your mouse to the bottom of the screen to open the Menu Bar and
click the Main Menu button (
).
2. Click System.
Press on the Mini-Keyboard after you have entered the Date or Time
3. Configure the following:
• Date: Click inside the field and enter the month, date, and year.
• Time: Click inside the field and enter the time.
• (Optional) Date Format: Use the drop-down menu to select MM/DD/YY or, DD/
MM/YY, or YY-MM-DD.
• (Optional) Time Format: Use the drop-down menu to select 12HOURS or
24HOURS.
• (Optional) DST: Click the Setup button next to DST to configure automatic Daylight
Savings Time adjustments.
• (Optional) NTP: Click the Setup button next to NTP to synchronize your DVR’s
time and date with a Network Time Protocol (NTP) time server.
Note
A constant internet connection is required for the NTP server feature to function.
4. Click Apply to save your settings.
10.1 Configuring Daylight Savings Time (DST)
If your region observes Daylight Savings Time (DST), follow the instructions below to con-
figure your DVR to automatically update the time when the clock updates.
#LX400005; r. 1.0/13714/13883; en-US
23
To Next Page
Loading...
Need help?
General
