CMS-D3 CENTRAL MANAGEMENT SOFTWARE
17
17.5.5 Using PTZ Presets
1. Set camera position
2. Click to access Preset controls
3. Select preset number
4. Go to preset
5. Save selected preset as current position
6. Delete selected preset
17.5.6 Using PTZ Cruise
When PTZ cruise is enabled, the camera will cycle through saved presets. You must save
presets to use PTZ cruise.
To start / stop PTZ cruise:
1. Click Cruise.
2. Click
to start the PTZ cruise. Click to stop the PTZ cruise.
17.6 Remote Playback
Remote Playback allows you to view recorded video from your DVR on your computer.
To access Remote Playback:
1. From Control Panel, click Remote Playback (
).
2. Double-click the camera group then the DVR you would like to playback from.
3. Check up to four channels you would like to playback.
• Optional: Check Synchronous Playback to playback video from multiple chan-
nels at the same time. If this is unchecked, you can select different playback times
on each camera.
4. In the calendar, select the day you would like to playback. A red triangle is shown on
days that have recorded video available for the selected channel(s).
5. Click Search. The time bar shows video recorded on your DVR.
6. Click
to start playback at the selected time.
#LX400005; r. 1.0/13714/13883; en-US
111
To Next Page
Loading...
