Remote Viewing Interface
16
16.12 Configuring Recording Parameters
To configure system recording parameters:
1. Click the Remote Setting tab, and then click Record > Rec Parameters.
The recording schedule is arranged as a grid. Each row represents a recording type (Continuous, Mo-
tion, and Alarm), and each box represents an hour.
2. Configure the following:
• Channel: Select the channel you wish to configure.
• Record: Select Enable or Disable to start or stop system recording.
• Pack Duration: Select the duration of each saved file on the system. For example,
if you select 15 minutes, then every file will contain 15 minutes of footage.
Note
Pack Duration settings are not supported on D3312 / D3316 / D3332, which package video files
into files of a maximum size of 255MB.
• Pre-record: Select whether to enable or disable pre-recording.
3. Click Save to apply your settings.
16.13 Configuring the Recording Schedule
To configure the recording schedule:
1. Click the Remote Setting tab, and then click Record > Schedule.
#LX400005; r. 1.0/13714/13883; en-US
85
To Next Page
Loading...
