Mobile Apps: Accessing your DVR Using a Mobile Device21
5. Configure the following:
• Device Name: Enter a name for your DVR of your choice.
• IP Address: Enter your DDNS address (e.g. tomsmith.myddns-flir.com).
• Client Port: Enter the Client Port (default: 9000).
• User Name: Enter the DVR’s user name (default: admin).
• Password: Enter the DVR password. By default the password is 000000.
6. Tap Save. The app connects to your DVR and streams live video from your cameras.
Note
If this is the first time connecting, you will be prompted to change the password. Enter a new 6 char-
acter password and tap Done. Then, tap Save again to connect to your cameras.
21.4.4 Digi Summit Interface
You can use Digi Summit in landscape mode only.
#LX400005; r. 1.0/13714/13883; en-US
144
To Next Page
Loading...
Need help?
General
