FLIR D3300 Series - Configuring Display Settings; Configuring Privacy Zone Settings

Remote Viewing Interface
16
16.10 Configuring Display Settings
1. Click the Remote Setting tab, and then click Display > Live.
2. Configure the following:
• Channel: Select the channel you want to modify.
• Name: Enter the channel name if you want to re-name the channel
• Position: Select the position of where the title appears in the channel.
• Covert: Enable or Disable covert recording. Covert recording will hide the channel
on the DVR’s local display. You will see be able to see the channel when you log in
remotely.
• Show Time: Select Enable or Disable to show or hide the time on the DVR’s local
display.
• Record Time: Select Enable or Disable to show or hide the record time on the re-
mote display.
3. Click Save to apply your settings.
16.11 Configuring Privacy Zone Settings
WARNING
Areas covered by privacy zones are not visible in recordings.
You can blank out a certain portion of the channel with a black box.
#LX400005; r. 1.0/13714/13883; en-US
83